ATTRIBUTES(7) Linux Programmer's Manual ATTRIBUTES(7)
NAME
attributes - POSIX safety concepts
DESCRIPTION
Note: the text of this man page is based on the material taken from the
"POSIX Safety Concepts" section of the GNU C Library manual. Further
details on the topics described here can be found in that manual.
Various function manual pages include a section ATTRIBUTES that
describes the safety of calling the function in various contexts. This
section annotates functions with the following safety markings:
MT-Safe
MT-Safe or Thread-Safe functions are safe to call in the pres-
ence of other threads. MT, in MT-Safe, stands for Multi Thread.
Being MT-Safe does not imply a function is atomic, nor that it
uses any of the memory synchronization mechanisms POSIX exposes
to users. It is even possible that calling MT-Safe functions in
sequence does not yield an MT-Safe combination. For example,
having a thread call two MT-Safe functions one right after the
other does not guarantee behavior equivalent to atomic execution
of a combination of both functions, since concurrent calls in
other threads may interfere in a destructive way.
Whole-program optimizations that could inline functions across
library interfaces may expose unsafe reordering, and so perform-
ing inlining across the GNU C Library interface is not recom-
mended. The documented MT-Safety status is not guaranteed under
whole-program optimization. However, functions defined in user-
visible headers are designed to be safe for inlining.
MT-Unsafe
MT-Unsafe functions are not safe to call in a multithreaded pro-
grams.
Other keywords that appear in safety notes are defined in subsequent
sections.
Conditionally safe features
For some features that make functions unsafe to call in certain con-
texts, there are known ways to avoid the safety problem other than
refraining from calling the function altogether. The keywords that
follow refer to such features, and each of their definitions indicates
how the whole program needs to be constrained in order to remove the
safety problem indicated by the keyword. Only when all the reasons
that make a function unsafe are observed and addressed, by applying the
documented constraints, does the function become safe to call in a con-
text.
init Functions marked with init as an MT-Unsafe feature perform MT-
Unsafe initialization when they are first called.
Calling such a function at least once in single-threaded mode
removes this specific cause for the function to be regarded as
MT-Unsafe. If no other cause for that remains, the function can
then be safely called after other threads are started.
race Functions annotated with race as an MT-Safety issue operate on
objects in ways that may cause data races or similar forms of
destructive interference out of concurrent execution. In some
cases, the objects are passed to the functions by users; in oth-
ers, they are used by the functions to return values to users;
in others, they are not even exposed to users.
const Functions marked with const as an MT-Safety issue non-atomically
modify internal objects that are better regarded as constant,
because a substantial portion of the GNU C Library accesses them
without synchronization. Unlike race, which causes both readers
and writers of internal objects to be regarded as MT-Unsafe,
this mark is applied to writers only. Writers remain MT-Unsafe
to call, but the then-mandatory constness of objects they modify
enables readers to be regarded as MT-Safe (as long as no other
reasons for them to be unsafe remain), since the lack of syn-
chronization is not a problem when the objects are effectively
constant.
The identifier that follows the const mark will appear by itself
as a safety note in readers. Programs that wish to work around
this safety issue, so as to call writers, may use a non-recur-
sive read-write lock associated with the identifier, and guard
all calls to functions marked with const followed by the identi-
fier with a write lock, and all calls to functions marked with
the identifier by itself with a read lock.
sig Functions marked with sig as a MT-Safety issue may temporarily
install a signal handler for internal purposes, which may inter-
fere with other uses of the signal, identified after a colon.
This safety problem can be worked around by ensuring that no
other uses of the signal will take place for the duration of the
call. Holding a non-recursive mutex while calling all functions
that use the same temporary signal; blocking that signal before
the call and resetting its handler afterwards is recommended.
term Functions marked with term as an MT-Safety issue may change the
terminal settings in the recommended way, namely: call tcge-
tattr(3), modify some flags, and then call tcsetattr(3), this
creates a window in which changes made by other threads are
lost. Thus, functions marked with term are MT-Unsafe.
It is thus advisable for applications using the terminal to
avoid concurrent and reentrant interactions with it, by not
using it in signal handlers or blocking signals that might use
it, and holding a lock while calling these functions and inter-
acting with the terminal. This lock should also be used for
mutual exclusion with functions marked with race:tcattr(fd),
where fd is a file descriptor for the controlling terminal. The
caller may use a single mutex for simplicity, or use one mutex
per terminal, even if referenced by different file descriptors.
Other safety remarks
Additional keywords may be attached to functions, indicating features
that do not make a function unsafe to call, but that may need to be
taken into account in certain classes of programs:
locale Functions annotated with locale as an MT-Safety issue read from
the locale object without any form of synchronization. Func-
tions annotated with locale called concurrently with locale
changes may behave in ways that do not correspond to any of the
locales active during their execution, but an unpredictable mix
thereof.
We do not mark these functions as MT-Unsafe, however, because
functions that modify the locale object are marked with
const:locale and regarded as unsafe. Being unsafe, the latter
are not to be called when multiple threads are running or asyn-
chronous signals are enabled, and so the locale can be consid-
ered effectively constant in these contexts, which makes the
former safe.
env Functions marked with env as an MT-Safety issue access the envi-
ronment with getenv(3) or similar, without any guards to ensure
safety in the presence of concurrent modifications.
We do not mark these functions as MT-Unsafe, however, because
functions that modify the environment are all marked with
const:env and regarded as unsafe. Being unsafe, the latter are
not to be called when multiple threads are running or asynchro-
nous signals are enabled, and so the environment can be consid-
ered effectively constant in these contexts, which makes the
former safe.
hostid The function marked with hostid as an MT-Safety issue reads from
the system-wide data structures that hold the "host ID" of the
machine. These data structures cannot generally be modified
atomically. Since it is expected that the "host ID" will not
normally change, the function that reads from it (gethostid(3))
is regarded as safe, whereas the function that modifies it
(sethostid(3)) is marked with const:hostid, indicating it may
require special care if it is to be called. In this specific
case, the special care amounts to system-wide (not merely intra-
process) coordination.
sigintr
Functions marked with sigintr as an MT-Safety issue access the
GNU C Library _sigintr internal data structure without any
guards to ensure safety in the presence of concurrent modifica-
tions.
We do not mark these functions as MT-Unsafe, however, because
functions that modify this data structure are all marked with
const:sigintr and regarded as unsafe. Being unsafe, the latter
are not to be called when multiple threads are running or asyn-
chronous signals are enabled, and so the data structure can be
considered effectively constant in these contexts, which makes
the former safe.
cwd Functions marked with cwd as an MT-Safety issue may temporarily
change the current working directory during their execution,
which may cause relative pathnames to be resolved in unexpected
ways in other threads or within asynchronous signal or cancella-
tion handlers.
This is not enough of a reason to mark so-marked functions as
MT-Unsafe, but when this behavior is optional (e.g., nftw(3)
with FTW_CHDIR), avoiding the option may be a good alternative
to using full pathnames or file descriptor-relative (e.g., ope-
nat(2)) system calls.
:identifier
Annotations may sometimes be followed by identifiers, intended
to group several functions that, for example, access the data
structures in an unsafe way, as in race and const, or to provide
more specific information, such as naming a signal in a function
marked with sig. It is envisioned that it may be applied to
lock and corrupt as well in the future.
In most cases, the identifier will name a set of functions, but
it may name global objects or function arguments, or identifi-
able properties or logical components associated with them, with
a notation such as, for example, :buf(arg) to denote a buffer
associated with the argument arg, or :tcattr(fd) to denote the
terminal attributes of a file descriptor fd.
The most common use for identifiers is to provide logical groups
of functions and arguments that need to be protected by the same
synchronization primitive in order to ensure safe operation in a
given context.
/condition
Some safety annotations may be conditional, in that they only
apply if a boolean expression involving arguments, global vari-
ables or even the underlying kernel evaluates to true. For
example, /!ps and /one_per_line indicate the preceding marker
only applies when argument ps is NULL, or global variable
one_per_line is nonzero.
When all marks that render a function unsafe are adorned with
such conditions, and none of the named conditions hold, then the
function can be regarded as safe.
SEE ALSO
pthreads(7)
COLOPHON
This page is part of release 4.15 of the Linux man-pages project. A
description of the project, information about reporting bugs, and the
latest version of this page, can be found at
https://www.kernel.org/doc/man-pages/.
Linux 2015-03-02 ATTRIBUTES(7)
Linux-Distributionen
Huschi als Linux-Admin