RRDBUILD(1) rrdtool RRDBUILD(1)
NAME
rrdbuild - Instructions for building RRDtool
OVERVIEW
If you downloaded the source of RRDtool you have to compile it. This
document will give some information on how this is done.
RRDtool relies on services of third part libraries. Some of these
libraries may already be installed on your system. You have to compile
copies of the other ones before you can build RRDtool.
This document will tell you about all the necessary steps to get going.
These instructions assume you are using a bash shell. If you use
csh/tcsh, then you can either type bash to switch to bash for the
compilation or if you know what you are doing just replace the export
bits with setenv.
We further assume that your copies of tar and make are actually GNU tar
and GNU make respectively. It could be that they are installed as gtar
and gmake on your system.
OPTIMISTIC BUILD
Before you start to build RRDtool, you have to decide two things:
1. In which directory you want to build the software.
2. Where you want to install the software.
Once you have decided. Save the two locations into environment
variables.
BUILD_DIR=/tmp/rrdbuild
INSTALL_DIR=/opt/rrdtool-1.4.8
If your /tmp is mounted with the option noexec (RHEL seems todo that)
you have to choose a different directory!
Now make sure the BUILD_DIR exists and go there:
mkdir -p $BUILD_DIR
cd $BUILD_DIR
Lets first assume you already have all the necessary libraries pre-
installed.
wget http://oss.oetiker.ch/rrdtool/pub/rrdtool-1.4.8.tar.gz
gunzip -c rrdtool-1.4.8.tar.gz | tar xf -
cd rrdtool-1.4.8
./configure --prefix=$INSTALL_DIR && make && make install
Ok, this was very optimistic. This try will probably have ended with
configure complaining about several missing libraries.
INSTALLING DEPENDENCIES
If your OS lets you install additional packages from a software
repository, you may get away with installing the missing packages. When
the packages are installed, run configure again and try to compile
again. Below you find some hints on getting your OS ready for compiling
RRDtool.
Additions to this list are welcome. In general RRDtool should work with
the latest versions of the libraries. The versions listed here are just
what was current when I tested this.
OpenSolaris 2008.05
Just add a compiler and the gnome development package:
pkg install sunstudioexpress
pkg install SUNWgnome-common-devel
There is a problem with cairo.pc on OpenSolaris. It suggests that
xrender is required for compilation with cairo. This is not true and
also bad since OpenSolaris does not include an xrender.pc file. Use
Perl to fix this:
perl -i~ -p -e 's/(Requires.*?)\s*xrender.*/$1/' /usr/lib/pkgconfig/cairo.pc
Make sure the RRDtool build system finds your new compiler
export PATH=/opt/SunStudioExpress/bin
Debian / Ubuntu
Use apt-get to make sure you have all that is required. A number of
packages will get added through dependencies.
apt-get install libpango1.0-dev libxml2-dev
Gentoo
In Gentoo installing RRDtool is really simple you just need to emerge
rrdtool. All dependencies will be handled automatically by the portage
system. The only thing you should care about are USE flags, which allow
you fine tune features RRDtool will be built with. Currently the
following USE flags are available:
doc - install .html and .txt documentation
into /usr/share/doc/rrdtool-1.x.xx/
perl - build and install perl language bindings
python - build and install python language bindings
ruby - build and install ruby language bindings
tcl - build and install tcl language bindings
rrdcgi - build and install rrdcgi
After you've decided which USE flags you need, set them either in
make.conf or /etc/portage/package.use and finally run:
# emerge -va rrdtool
Take a look at Gentoo handbook for further details on how to manage USE
flags: http://www.gentoo.org/doc/en/handbook/handbook-x86.xml?part=2
BUILDING DEPENDENCIES
But again this may have been too optimistic still, and you actually
have to compile your own copies of some of the required libraries.
Things like libpng and zlib are pretty standard so you will probably
have them on your system anyway. Freetype, Fontinst, Cairo, Pango may
be installed, but it is possible that they are pretty old and thus
don't live up to our expectations, so you may want to compile their
latest versions.
General build tips for AIX
If you are working with AIX, you may find the --disable-shared option
will cause things to break for you. In that case you may have to
install the shared libraries into the RRDtool PREFIX and work with
--disable-static instead.
Another hint to get RRDtool working on AIX is to use the IBM XL C
Compiler:
export CC=/usr/vac/bin/cc
export PERLCC=$CC
(Better instructions for AIX welcome!)
Build Instructions
Some libraries want to know where other libraries are. For this to
work, set the following environment variable
export PKG_CONFIG_PATH=${INSTALL_DIR}/lib/pkgconfig
export PATH=$INSTALL_DIR/bin:$PATH
The above relies on the presence of the pkgconfig program. Below you
find instructions on how to compile pkgconfig.
Since we are compiling libraries dynamically, they must know where to
find each other. This is done by setting an appropriate LDFLAGS.
Unfortunately, the syntax again differs from system to system:
Solaris
export LDFLAGS=-R${INSTALL_DIR}/lib
if you are using the Sun Studio/Forte compiler, you may also want
to set
CFLAGS="-xO3 -xcode=pic13" (SPARC)
CFLAGS="-xO3 -Kpic" (x86)
Linux
export LDFLAGS="-Wl,--rpath -Wl,${INSTALL_DIR}/lib"
HPUX
export LDFLAGS="+b${INSTALL_DIR}/lib"
AIX
export LDFLAGS="-Wl,-blibpath:${INSTALL_DIR}/lib"
If you have GNU make installed and it is not called 'make', then do
export MAKE=gmake
export GNUMAKE=gmake
otherwise just do
export MAKE=make
Building pkgconfig
As mentioned above, without pkgconfig the whole build process will be
lots of pain and suffering, so make sure you have a copy on your
system. If it is not available natively, here is how to compile it.
wget http://pkgconfig.freedesktop.org/releases/pkg-config-0.23.tar.gz
gunzip -c pkg-config-0.23.tar.gz | tar xf -
cd pkg-config-0.23
./configure --prefix=$INSTALL_DIR CFLAGS="-O3 -fPIC"
$MAKE
$MAKE install
After installing pkgconfig in a custom directory, setting up the
corresponding environment variable will be helpful.
export PKG_CONFIG=$INSTALL_DIR/bin/pkg-config
Building zlib
Chances are very high that you already have that on your system ...
cd $BUILD_DIR
wget http://oss.oetiker.ch/rrdtool/pub/libs/zlib-1.2.3.tar.gz
gunzip -c zlib-1.2.3.tar.gz | tar xf -
cd zlib-1.2.3
./configure --prefix=$INSTALL_DIR CFLAGS="-O3 -fPIC" --shared
$MAKE
$MAKE install
Building libpng
Libpng itself requires zlib to build, so we need to help a bit. If you
already have a copy of zlib on your system (which is very likely) you
can drop the settings of LDFLAGS and CPPFLAGS. Note that the backslash
(\) at the end of line 4 means that line 4 and line 5 are on one line.
cd $BUILD_DIR
wget http://oss.oetiker.ch/rrdtool/pub/libs/libpng-1.2.18.tar.gz
gunzip -c libpng-1.2.18.tar.gz | tar xf -
cd libpng-1.2.10
env CFLAGS="-O3 -fPIC" ./configure --prefix=$INSTALL_DIR
$MAKE
$MAKE install
Building freetype
cd $BUILD_DIR
wget http://oss.oetiker.ch/rrdtool/pub/libs/freetype-2.3.5.tar.gz
gunzip -c freetype-2.3.5.tar.gz | tar xf -
cd freetype-2.3.5
./configure --prefix=$INSTALL_DIR CFLAGS="-O3 -fPIC"
$MAKE
$MAKE install
If you run into problems building freetype on Solaris, you may want to
try to add the following at the start the configure line:
env EGREP=egrep
Building LibXML2
cd $BUILD_DIR
wget http://oss.oetiker.ch/rrdtool/pub/libs/libxml2-2.6.32.tar.gz
gunzip -c libxml2-2.6.32.tar.gz | tar xf -
cd libxml2-2.6.32
./configure --prefix=$INSTALL_DIR CFLAGS="-O3 -fPIC"
$MAKE
$MAKE install
Building fontconfig
Note that fontconfig has a run time configuration file in
INSTALL_DIR/etc you may want to adjust that so that fontconfig finds
the fonts on your system. Run the fc-cache program to build the
fontconfig cache after changing the config file.
cd $BUILD_DIR
wget http://oss.oetiker.ch/rrdtool/pub/libs/fontconfig-2.4.2.tar.gz
gunzip -c fontconfig-2.4.2.tar.gz | tar xf -
cd fontconfig-2.4.2
./configure --prefix=$INSTALL_DIR CFLAGS="-O3 -fPIC" --with-freetype-config=$INSTALL_DIR/bin/freetype-config
$MAKE
$MAKE install
Building Pixman
cd $BUILD_DIR
wget http://oss.oetiker.ch/rrdtool/pub/libs/pixman-0.10.0.tar.gz
gunzip -c pixman-0.10.0.tar.gz | tar xf -
cd pixman-0.10.0
./configure --prefix=$INSTALL_DIR CFLAGS="-O3 -fPIC"
$MAKE
$MAKE install
Building Cairo
cd $BUILD_DIR
wget http://oss.oetiker.ch/rrdtool/pub/libs/cairo-1.6.4.tar.gz
gunzip -c cairo-1.6.4.tar.gz | tar xf -
cd cairo-1.6.4
./configure --prefix=$INSTALL_DIR \
--enable-xlib=no \
--enable-xlib-render=no \
--enable-win32=no \
CFLAGS="-O3 -fPIC"
$MAKE
$MAKE install
When building on Solaris you may want todo
./configure --prefix=$INSTALL_DIR \
--enable-xlib=no \
--enable-xlib-render=no \
--enable-win32=no \
CFLAGS="-O3 -fPIC -D_POSIX_PTHREAD_SEMANTICS"
Building Glib
cd $BUILD_DIR
wget http://oss.oetiker.ch/rrdtool/pub/libs/glib-2.15.4.tar.gz
gunzip -c glib-2.15.4.tar.gz | tar xf -
cd glib-2.15.4
./configure --prefix=$INSTALL_DIR CFLAGS="-O3 -fPIC"
$MAKE
$MAKE install
Building Pango
cd $BUILD_DIR
wget http://oss.oetiker.ch/rrdtool/pub/libs/pango-1.21.1.tar.bz2
bunzip2 -c pango-1.21.1.tar.bz2 | tar xf -
cd pango-1.21.1
./configure --prefix=$INSTALL_DIR CFLAGS="-O3 -fPIC" --without-x
$MAKE
$MAKE install
Building rrdtool (second try)
Now all the dependent libraries are built and you can try again. This
time you tell configure where it should be looking for libraries and
include files. This is done via environment variables. Depending on the
shell you are running, the syntax for setting environment variables is
different.
And finally try building again. We disable the python and tcl bindings
because it seems that a fair number of people have ill configured
python and tcl setups that would prevent RRDtool from building if they
are included in their current state.
cd $BUILD_DIR/rrdtool-1.4.8
./configure --prefix=$INSTALL_DIR --disable-tcl --disable-python
$MAKE clean
$MAKE
$MAKE install
SOLARIS HINT: if you want to build the Perl module for the native Perl
(the one shipping with Solaris) you will need the Sun Forte compiler
installed on your box or you have to hand-tune
bindings/perl-shared/Makefile while building!
Now go to $INSTALL_DIR/share/rrdtool/examples/ and run them to see if
your build has been successful.
AUTHOR
Tobias Oetiker <tobi AT oetiker.ch>
1.4.8 2013-05-23 RRDBUILD(1)
Linux-Distributionen
Huschi als Linux-Admin