huschi.net

NETSTAT(8)            Linux System Administrator's Manual           NETSTAT(8)
NAME
       netstat  - Print network connections, routing tables, interface statis-
       tics, masquerade connections, and multicast memberships
SYNOPSIS
       netstat [address_family_options] [--tcp|-t]  [--udp|-u]  [--udplite|-U]
       [--sctp|-S]   [--raw|-w]  [--l2cap|-2]  [--rfcomm|-f]  [--listening|-l]
       [--all|-a]    [--numeric|-n]    [--numeric-hosts]     [--numeric-ports]
       [--numeric-users]       [--symbolic|-N]      [--extend|-e[--extend|-e]]
       [--timers|-o]    [--program|-p]    [--verbose|-v]     [--continuous|-c]
       [--wide|-W] [delay]
       netstat              {--route|-r}              [address_family_options]
       [--extend|-e[--extend|-e]]        [--verbose|-v]         [--numeric|-n]
       [--numeric-hosts] [--numeric-ports] [--numeric-users] [--continuous|-c]
       [delay]
       netstat {--interfaces|-I|-i}  [--all|-a]  [--extend|-e]  [--verbose|-v]
       [--program|-p]   [--numeric|-n]   [--numeric-hosts]   [--numeric-ports]
       [--numeric-users] [--continuous|-c] [delay]
       netstat      {--groups|-g}       [--numeric|-n]       [--numeric-hosts]
       [--numeric-ports] [--numeric-users] [--continuous|-c] [delay]
       netstat       {--masquerade|-M}       [--extend|-e]      [--numeric|-n]
       [--numeric-hosts] [--numeric-ports] [--numeric-users] [--continuous|-c]
       [delay]
       netstat    {--statistics|-s}   [--tcp|-t]   [--udp|-u]   [--udplite|-U]
       [--sctp|-S] [--raw|-w] [delay]
       netstat {--version|-V}
       netstat {--help|-h}
       address_family_options:
       [-4|--inet]                   [-6|--inet6]                    [--proto-
       col={inet,inet6,unix,ipx,ax25,netrom,ddp,bluetooth, ... } ] [--unix|-x]
       [--inet|--ip|--tcpip] [--ax25] [--x25] [--rose]  [--ash]  [--bluetooth]
       [--ipx] [--netrom] [--ddp|--appletalk] [--econet|--ec]
NOTES
       This  program  is  mostly  obsolete.   Replacement  for  netstat is ss.
       Replacement for netstat -r is ip route.  Replacement for netstat -i  is
       ip -s link.  Replacement for netstat -g is ip maddr.
DESCRIPTION
       Netstat  prints  information about the Linux networking subsystem.  The
       type of information printed is controlled by  the  first  argument,  as
       follows:
   (none)
       By  default,  netstat  displays  a  list of open sockets.  If you don't
       specify any address families, then the active sockets of all configured
       address families will be printed.
   --route, -r
       Display  the kernel routing tables. See the description in route(8) for
       details.  netstat -r and route -e produce the same output.
   --groups, -g
       Display multicast group membership information for IPv4 and IPv6.
   --interfaces=iface , -I=iface , -i
       Display a table of all network interfaces, or the specified iface.
   --masquerade, -M
       Display a list of masqueraded connections.
   --statistics, -s
       Display summary statistics for each protocol.
OPTIONS
   --verbose, -v
       Tell the user what is going on by being verbose. Especially print  some
       useful information about unconfigured address families.
   --wide, -W
       Do not truncate IP addresses by using output as wide as needed. This is
       optional for now to not break existing scripts.
   --numeric, -n
       Show numerical addresses instead of trying to determine symbolic  host,
       port or user names.
   --numeric-hosts
       shows  numerical  host  addresses but does not affect the resolution of
       port or user names.
   --numeric-ports
       shows numerical port numbers but does not affect the resolution of host
       or user names.
   --numeric-users
       shows  numerical user IDs but does not affect the resolution of host or
       port names.
   --protocol=family, -A
       Specifies the address families (perhaps better described as  low  level
       protocols)  for  which  connections are to be shown.  family is a comma
       (',') separated list of address family keywords like inet, inet6, unix,
       ipx,  ax25,  netrom,  econet,  ddp,  and  bluetooth.  This has the same
       effect as using the --inet|-4, --inet6|-6,  --unix|-x,  --ipx,  --ax25,
       --netrom, --ddp, and --bluetooth options.
       The address family inet (Iv4) includes raw, udp, udplite and tcp proto-
       col sockets.
       The address family bluetooth (Iv4) includes l2cap and  rfcomm  protocol
       sockets.
   -c, --continuous
       This  will cause netstat to print the selected information every second
       continuously.
   -e, --extend
       Display additional information.  Use  this  option  twice  for  maximum
       detail.
   -o, --timers
       Include information related to networking timers.
   -p, --program
       Show the PID and name of the program to which each socket belongs.
   -l, --listening
       Show only listening sockets.  (These are omitted by default.)
   -a, --all
       Show  both  listening and non-listening (for TCP this means established
       connections) sockets.  With the --interfaces  option,  show  interfaces
       that are not up
   -F
       Print routing information from the FIB.  (This is the default.)
   -C
       Print routing information from the route cache.
   delay
       Netstat will cycle printing through statistics every delay seconds.
OUTPUT
   Active Internet connections (TCP, UDP, UDPLite, raw)
   Proto
       The protocol (tcp, udp, udpl, raw) used by the socket.
   Recv-Q
       Established:  The  count  of  bytes not copied by the user program con-
       nected to this socket.  Listening: Since Kernel 2.6.18 this column con-
       tains the current syn backlog.
   Send-Q
       Established:  The  count  of bytes not acknowledged by the remote host.
       Listening: Since Kernel 2.6.18 this column contains the maximum size of
       the syn backlog.
   Local Address
       Address  and  port  number  of the local end of the socket.  Unless the
       --numeric (-n) option is specified, the socket address is  resolved  to
       its  canonical host name (FQDN), and the port number is translated into
       the corresponding service name.
   Foreign Address
       Address and port number of the remote end of the socket.  Analogous  to
       "Local Address".
   State
       The state of the socket. Since there are no states in raw mode and usu-
       ally no states used in UDP and UDPLite, this column may be left  blank.
       Normally this can be one of several values:
       ESTABLISHED
              The socket has an established connection.
       SYN_SENT
              The socket is actively attempting to establish a connection.
       SYN_RECV
              A connection request has been received from the network.
       FIN_WAIT1
              The socket is closed, and the connection is shutting down.
       FIN_WAIT2
              Connection  is  closed, and the socket is waiting for a shutdown
              from the remote end.
       TIME_WAIT
              The socket is waiting after close to handle packets still in the
              network.
       CLOSE  The socket is not being used.
       CLOSE_WAIT
              The remote end has shut down, waiting for the socket to close.
       LAST_ACK
              The  remote end has shut down, and the socket is closed. Waiting
              for acknowledgement.
       LISTEN The socket is listening for incoming connections.  Such  sockets
              are  not included in the output unless you specify the --listen-
              ing (-l) or --all (-a) option.
       CLOSING
              Both sockets are shut down but we still don't have all our  data
              sent.
       UNKNOWN
              The state of the socket is unknown.
   User
       The username or the user id (UID) of the owner of the socket.
   PID/Program name
       Slash-separated  pair  of  the process id (PID) and process name of the
       process that owns the socket.   --program  causes  this  column  to  be
       included.  You will also need superuser privileges to see this informa-
       tion on sockets you don't own.  This identification information is  not
       yet available for IPX sockets.
   Timer
       TCP  timer associated with this socket. The format is timer(a/b/c). The
       timer is one of the following values:
       off    There is no timer set for this socket.
       on     The retransmission timer is active for the socket.
       keepalive
              The keepalive timer is active for the socket.
       timewait
              The connection is closing and the timewait timer is  active  for
              the socket.
       The values in the brackets:
       a      Timer value.
       b      Number of retransmissions sent.
       c      Number of keepalives sent.
   Active UNIX domain Sockets
   Proto
       The protocol (usually unix) used by the socket.
   RefCnt
       The reference count (i.e. attached processes via this socket).
   Flags
       The  flags displayed is SO_ACCEPTON (displayed as ACC), SO_WAITDATA (W)
       or SO_NOSPACE (N).  SO_ACCECPTON is  used  on  unconnected  sockets  if
       their  corresponding  processes  are waiting for a connect request. The
       other flags are not of normal interest.
   Type
       There are several types of socket access:
       SOCK_DGRAM
              The socket is used in Datagram (connectionless) mode.
       SOCK_STREAM
              This is a stream (connection) socket.
       SOCK_RAW
              The socket is used as a raw socket.
       SOCK_RDM
              This one serves reliably-delivered messages.
       SOCK_SEQPACKET
              This is a sequential packet socket.
       SOCK_PACKET
              Raw interface access socket.
       UNKNOWN
              Who ever knows what the future will bring us - just fill in here
              :-)
   State
       This field will contain one of the following Keywords:
       FREE   The socket is not allocated
       LISTENING
              The  socket is listening for a connection request.  Such sockets
              are only included in the output if you specify  the  --listening
              (-l) or --all (-a) option.
       CONNECTING
              The socket is about to establish a connection.
       CONNECTED
              The socket is connected.
       DISCONNECTING
              The socket is disconnecting.
       (empty)
              The socket is not connected to another one.
       UNKNOWN
              This state should never happen.
   PID/Program name
       Process  ID  (PID)  and process name of the process that has the socket
       open.  More info available in Active Internet connections section writ-
       ten above.
   Path
       This  is the path name as which the corresponding processes attached to
       the socket.
   Active IPX sockets
       (this needs to be done by somebody who knows it)
   Active NET/ROM sockets
       (this needs to be done by somebody who knows it)
   Active AX.25 sockets
       (this needs to be done by somebody who knows it)
FILES
       /etc/services -- The services translation file
       /proc -- Mount point for the proc filesystem,  which  gives  access  to
       kernel status information via the following files.
       /proc/net/dev -- device information
       /proc/net/raw -- raw socket information
       /proc/net/tcp -- TCP socket information
       /proc/net/udp -- UDP socket information
       /proc/net/udplite -- UDPLite socket information
       /proc/net/igmp -- IGMP multicast information
       /proc/net/unix -- Unix domain socket information
       /proc/net/ipx -- IPX socket information
       /proc/net/ax25 -- AX25 socket information
       /proc/net/appletalk -- DDP (appletalk) socket information
       /proc/net/nr -- NET/ROM socket information
       /proc/net/route -- IP routing information
       /proc/net/ax25_route -- AX25 routing information
       /proc/net/ipx_route -- IPX routing information
       /proc/net/nr_nodes -- NET/ROM nodelist
       /proc/net/nr_neigh -- NET/ROM neighbours
       /proc/net/ip_masquerade -- masqueraded connections
       /sys/kernel/debug/bluetooth/l2cap -- Bluetooth L2CAP information
       /sys/kernel/debug/bluetooth/rfcomm -- Bluetooth serial connections
       /proc/net/snmp -- statistics
SEE ALSO
       route(8), ifconfig(8), iptables(8), proc(5) ss(8) ip(8)
BUGS
       Occasionally  strange  information may appear if a socket changes as it
       is viewed. This is unlikely to occur.
AUTHORS
       The  netstat  user   interface   was   written   by   Fred   Baumgarten
       <dc6iq AT insu1.de>,  the  man  page  basically by Matt
       Welsh   <mdw AT tc.edu>.   It   was   updated    by    Alan    Cox
       <Alan.Cox AT linux.org>,   updated   again  by  Tuan  Hoang  <tqhoang@big-
       foot.com>. The man page and the command included in the net-tools pack-
       age  is  totally rewritten by Bernd Eckenfels <ecki AT linux.de>.  UDPLite
       options were added by Brian Micek <bmicek AT gmail.com>
net-tools                         2014-10-07                        NETSTAT(8)