GIT-BISECT(1) Git Manual GIT-BISECT(1)
NAME
git-bisect - Use binary search to find the commit that introduced a bug
SYNOPSIS
git bisect <subcommand> <options>
DESCRIPTION
The command takes various subcommands, and different options depending
on the subcommand:
git bisect start [--term-(bad|new)=<term-new> --term-(good|old)=<term-old>]
[--no-checkout] [--first-parent] [<bad> [<good>...]] [--] [<paths>...]
git bisect (bad|new|<term-new>) [<rev>]
git bisect (good|old|<term-old>) [<rev>...]
git bisect terms [--term-(good|old) | --term-(bad|new)]
git bisect skip [(<rev>|<range>)...]
git bisect reset [<commit>]
git bisect (visualize|view)
git bisect replay <logfile>
git bisect log
git bisect run <cmd> [<arg>...]
git bisect help
This command uses a binary search algorithm to find which commit in
your project's history introduced a bug. You use it by first telling it
a "bad" commit that is known to contain the bug, and a "good" commit
that is known to be before the bug was introduced. Then git bisect
picks a commit between those two endpoints and asks you whether the
selected commit is "good" or "bad". It continues narrowing down the
range until it finds the exact commit that introduced the change.
In fact, git bisect can be used to find the commit that changed any
property of your project; e.g., the commit that fixed a bug, or the
commit that caused a benchmark's performance to improve. To support
this more general usage, the terms "old" and "new" can be used in place
of "good" and "bad", or you can choose your own terms. See section
"Alternate terms" below for more information.
Basic bisect commands: start, bad, good
As an example, suppose you are trying to find the commit that broke a
feature that was known to work in version v2.6.13-rc2 of your project.
You start a bisect session as follows:
$ git bisect start
$ git bisect bad # Current version is bad
$ git bisect good v2.6.13-rc2 # v2.6.13-rc2 is known to be good
Once you have specified at least one bad and one good commit, git
bisect selects a commit in the middle of that range of history, checks
it out, and outputs something similar to the following:
Bisecting: 675 revisions left to test after this (roughly 10 steps)
You should now compile the checked-out version and test it. If that
version works correctly, type
$ git bisect good
If that version is broken, type
$ git bisect bad
Then git bisect will respond with something like
Bisecting: 337 revisions left to test after this (roughly 9 steps)
Keep repeating the process: compile the tree, test it, and depending on
whether it is good or bad run git bisect good or git bisect bad to ask
for the next commit that needs testing.
Eventually there will be no more revisions left to inspect, and the
command will print out a description of the first bad commit. The
reference refs/bisect/bad will be left pointing at that commit.
Bisect reset
After a bisect session, to clean up the bisection state and return to
the original HEAD, issue the following command:
$ git bisect reset
By default, this will return your tree to the commit that was checked
out before git bisect start. (A new git bisect start will also do that,
as it cleans up the old bisection state.)
With an optional argument, you can return to a different commit
instead:
$ git bisect reset <commit>
For example, git bisect reset bisect/bad will check out the first bad
revision, while git bisect reset HEAD will leave you on the current
bisection commit and avoid switching commits at all.
Alternate terms
Sometimes you are not looking for the commit that introduced a
breakage, but rather for a commit that caused a change between some
other "old" state and "new" state. For example, you might be looking
for the commit that introduced a particular fix. Or you might be
looking for the first commit in which the source-code filenames were
finally all converted to your company's naming standard. Or whatever.
In such cases it can be very confusing to use the terms "good" and
"bad" to refer to "the state before the change" and "the state after
the change". So instead, you can use the terms "old" and "new",
respectively, in place of "good" and "bad". (But note that you cannot
mix "good" and "bad" with "old" and "new" in a single session.)
In this more general usage, you provide git bisect with a "new" commit
that has some property and an "old" commit that doesn't have that
property. Each time git bisect checks out a commit, you test if that
commit has the property. If it does, mark the commit as "new";
otherwise, mark it as "old". When the bisection is done, git bisect
will report which commit introduced the property.
To use "old" and "new" instead of "good" and bad, you must run git
bisect start without commits as argument and then run the following
commands to add the commits:
git bisect old [<rev>]
to indicate that a commit was before the sought change, or
git bisect new [<rev>...]
to indicate that it was after.
To get a reminder of the currently used terms, use
git bisect terms
You can get just the old term with git bisect terms --term-old or git
bisect terms --term-good; git bisect terms --term-new and git bisect
terms --term-bad can be used to learn how to call the commits more
recent than the sought change.
If you would like to use your own terms instead of "bad"/"good" or
"new"/"old", you can choose any names you like (except existing bisect
subcommands like reset, start, ...) by starting the bisection using
git bisect start --term-old <term-old> --term-new <term-new>
For example, if you are looking for a commit that introduced a
performance regression, you might use
git bisect start --term-old fast --term-new slow
Or if you are looking for the commit that fixed a bug, you might use
git bisect start --term-new fixed --term-old broken
Then, use git bisect <term-old> and git bisect <term-new> instead of
git bisect good and git bisect bad to mark commits.
Bisect visualize/view
To see the currently remaining suspects in gitk, issue the following
command during the bisection process (the subcommand view can be used
as an alternative to visualize):
$ git bisect visualize
Git detects a graphical environment through various environment
variables: DISPLAY, which is set in X Window System environments on
Unix systems. SESSIONNAME, which is set under Cygwin in interactive
desktop sessions. MSYSTEM, which is set under Msys2 and Git for
Windows. SECURITYSESSIONID, which may be set on macOS in interactive
desktop sessions.
If none of these environment variables is set, git log is used instead.
You can also give command-line options such as -p and --stat.
$ git bisect visualize --stat
Bisect log and bisect replay
After having marked revisions as good or bad, issue the following
command to show what has been done so far:
$ git bisect log
If you discover that you made a mistake in specifying the status of a
revision, you can save the output of this command to a file, edit it to
remove the incorrect entries, and then issue the following commands to
return to a corrected state:
$ git bisect reset
$ git bisect replay that-file
Avoiding testing a commit
If, in the middle of a bisect session, you know that the suggested
revision is not a good one to test (e.g. it fails to build and you know
that the failure does not have anything to do with the bug you are
chasing), you can manually select a nearby commit and test that one
instead.
For example:
$ git bisect good/bad # previous round was good or bad.
Bisecting: 337 revisions left to test after this (roughly 9 steps)
$ git bisect visualize # oops, that is uninteresting.
$ git reset --hard HEAD~3 # try 3 revisions before what
# was suggested
Then compile and test the chosen revision, and afterwards mark the
revision as good or bad in the usual manner.
Bisect skip
Instead of choosing a nearby commit by yourself, you can ask Git to do
it for you by issuing the command:
$ git bisect skip # Current version cannot be tested
However, if you skip a commit adjacent to the one you are looking for,
Git will be unable to tell exactly which of those commits was the first
bad one.
You can also skip a range of commits, instead of just one commit, using
range notation. For example:
$ git bisect skip v2.5..v2.6
This tells the bisect process that no commit after v2.5, up to and
including v2.6, should be tested.
Note that if you also want to skip the first commit of the range you
would issue the command:
$ git bisect skip v2.5 v2.5..v2.6
This tells the bisect process that the commits between v2.5 and v2.6
(inclusive) should be skipped.
Cutting down bisection by giving more parameters to bisect start
You can further cut down the number of trials, if you know what part of
the tree is involved in the problem you are tracking down, by
specifying path parameters when issuing the bisect start command:
$ git bisect start -- arch/i386 include/asm-i386
If you know beforehand more than one good commit, you can narrow the
bisect space down by specifying all of the good commits immediately
after the bad commit when issuing the bisect start command:
$ git bisect start v2.6.20-rc6 v2.6.20-rc4 v2.6.20-rc1 --
# v2.6.20-rc6 is bad
# v2.6.20-rc4 and v2.6.20-rc1 are good
Bisect run
If you have a script that can tell if the current source code is good
or bad, you can bisect by issuing the command:
$ git bisect run my_script arguments
Note that the script (my_script in the above example) should exit with
code 0 if the current source code is good/old, and exit with a code
between 1 and 127 (inclusive), except 125, if the current source code
is bad/new.
Any other exit code will abort the bisect process. It should be noted
that a program that terminates via exit(-1) leaves $? = 255, (see the
exit(3) manual page), as the value is chopped with & 0377.
The special exit code 125 should be used when the current source code
cannot be tested. If the script exits with this code, the current
revision will be skipped (see git bisect skip above). 125 was chosen as
the highest sensible value to use for this purpose, because 126 and 127
are used by POSIX shells to signal specific error status (127 is for
command not found, 126 is for command found but not executable--these
details do not matter, as they are normal errors in the script, as far
as bisect run is concerned).
You may often find that during a bisect session you want to have
temporary modifications (e.g. s/#define DEBUG 0/#define DEBUG 1/ in a
header file, or "revision that does not have this commit needs this
patch applied to work around another problem this bisection is not
interested in") applied to the revision being tested.
To cope with such a situation, after the inner git bisect finds the
next revision to test, the script can apply the patch before compiling,
run the real test, and afterwards decide if the revision (possibly with
the needed patch) passed the test and then rewind the tree to the
pristine state. Finally the script should exit with the status of the
real test to let the git bisect run command loop determine the eventual
outcome of the bisect session.
OPTIONS
--no-checkout
Do not checkout the new working tree at each iteration of the
bisection process. Instead just update the reference named
BISECT_HEAD to make it point to the commit that should be tested.
This option may be useful when the test you would perform in each
step does not require a checked out tree.
If the repository is bare, --no-checkout is assumed.
--first-parent
Follow only the first parent commit upon seeing a merge commit.
In detecting regressions introduced through the merging of a
branch, the merge commit will be identified as introduction of the
bug and its ancestors will be ignored.
This option is particularly useful in avoiding false positives when
a merged branch contained broken or non-buildable commits, but the
merge itself was OK.
EXAMPLES
o Automatically bisect a broken build between v1.2 and HEAD:
$ git bisect start HEAD v1.2 -- # HEAD is bad, v1.2 is good
$ git bisect run make # "make" builds the app
$ git bisect reset # quit the bisect session
o Automatically bisect a test failure between origin and HEAD:
$ git bisect start HEAD origin -- # HEAD is bad, origin is good
$ git bisect run make test # "make test" builds and tests
$ git bisect reset # quit the bisect session
o Automatically bisect a broken test case:
$ cat ~/test.sh
#!/bin/sh
make || exit 125 # this skips broken builds
~/check_test_case.sh # does the test case pass?
$ git bisect start HEAD HEAD~10 -- # culprit is among the last 10
$ git bisect run ~/test.sh
$ git bisect reset # quit the bisect session
Here we use a test.sh custom script. In this script, if make fails,
we skip the current commit. check_test_case.sh should exit 0 if
the test case passes, and exit 1 otherwise.
It is safer if both test.sh and check_test_case.sh are outside the
repository to prevent interactions between the bisect, make and
test processes and the scripts.
o Automatically bisect with temporary modifications (hot-fix):
$ cat ~/test.sh
#!/bin/sh
# tweak the working tree by merging the hot-fix branch
# and then attempt a build
if git merge --no-commit --no-ff hot-fix &&
make
then
# run project specific test and report its status
~/check_test_case.sh
status=$?
else
# tell the caller this is untestable
status=125
fi
# undo the tweak to allow clean flipping to the next commit
git reset --hard
# return control
exit $status
This applies modifications from a hot-fix branch before each test
run, e.g. in case your build or test environment changed so that
older revisions may need a fix which newer ones have already. (Make
sure the hot-fix branch is based off a commit which is contained in
all revisions which you are bisecting, so that the merge does not
pull in too much, or use git cherry-pick instead of git merge.)
o Automatically bisect a broken test case:
$ git bisect start HEAD HEAD~10 -- # culprit is among the last 10
$ git bisect run sh -c "make || exit 125; ~/check_test_case.sh"
$ git bisect reset # quit the bisect session
This shows that you can do without a run script if you write the
test on a single line.
o Locate a good region of the object graph in a damaged repository
$ git bisect start HEAD <known-good-commit> [ <boundary-commit> ... ] --no-checkout
$ git bisect run sh -c '
GOOD=$(git for-each-ref "--format=%(objectname)" refs/bisect/good-*) &&
git rev-list --objects BISECT_HEAD --not $GOOD >tmp.$$ &&
git pack-objects --stdout >/dev/null <tmp.$$
rc=$?
rm -f tmp.$$
test $rc = 0'
$ git bisect reset # quit the bisect session
In this case, when git bisect run finishes, bisect/bad will refer
to a commit that has at least one parent whose reachable graph is
fully traversable in the sense required by git pack objects.
o Look for a fix instead of a regression in the code
$ git bisect start
$ git bisect new HEAD # current commit is marked as new
$ git bisect old HEAD~10 # the tenth commit from now is marked as old
or:
$ git bisect start --term-old broken --term-new fixed
$ git bisect fixed
$ git bisect broken HEAD~10
Getting help
Use git bisect to get a short usage description, and git bisect help or
git bisect -h to get a long usage description.
SEE ALSO
Fighting regressions with git bisect[1], git-blame(1).
GIT
Part of the git(1) suite
NOTES
1. Fighting regressions with git bisect
file:///usr/share/doc/git/git-bisect-lk2009.html
Git 2.43.5 05/31/2024 GIT-BISECT(1)
Linux-Distributionen
Huschi als Linux-Admin